How to Setup PTZ Camera

How to Setup PTZ Camera (What Exactly You Should Know)

Congratulations!!! Assume you’ve safely received the delivery of your favorite PTZ cameras. Now, it’s time to install and configure the settings.

It’s going to be a little bit technical with all their setups and everything. However, if you can bear with us patiently, you’ll enjoy installing your pan/tilt/zoom cameras and learn something amazing for sure! So next time, when it comes to talking the same, you’re not afraid!

You’ll have lots of compliments for doing this brilliant job and the security of the place is yet to be ignored. With that in mind, let’s get to know how to setup PTZ cameras and what you should know about them.

How do PTZ Cameras Work?

Before we head up to anything else, it’s important to know how these specific types of cameras work. Well, basically these are fantastic and robotic types of security solutions for academic, home, or commercial environments.

Their pan, tilt, and zooming features allow for wide-angle surveillance of the place. So they come quite handy in places where you want to control a large area but with just one device. You can control multiple PTZ’s as a single operator.

You’ll need a controller configured with all your PTZ’s. Each one might have a different controlling protocol, but you can chain them together for better control in one place. Or perhaps you may individually connect them to the controller.

The controller will have all the tilting, zooming, and panning switches.

Then it’s easy to view multiple angles not easy to get with a conventional security camera. And the installing procedure requires a strong mounting base for it’s to be there permanently.

How to Setup and Configure PTZ Cameras

The video quality by a PTZ camera is much satisfying. You can even do broadcasting videos with it. And the installation is quite easy and flexible. To let it function with the robotic features, here’s what you’ll need to line up everything –

  • You as an operator
  • Camera Controller to operate
  • Baluns for balancing cables
  • or, Ethernet cables for long runs

Mounting the Camera

Interestingly, the pan/tilt/zoom camera has flexible mounting options. You can screw up the base on a flat wall surface. Or perhaps invert it upside down for mounting to the ceiling by creating a base junction box.

No matter whether you’re mounting on the wall or ceiling, just ensure the right flip mode. Otherwise, it’ll be a hard nut to crack when you see the picture is upside down.

You might also install or place a PTZ camera on a temporary station such as on the desk or a tripod. This will also allow for remote control if you have a controller set.

Wiring the Lines

When wiring the connections, look for the controller, power outlets, and video port cables. Always try to place the camera near the base station. This will eliminate the need for extra cables. Besides, you’ll get clear output since the original single is less wasted.

Like the Arlo camera installation, you can configure PTZ camera settings like arms, position, views, domes, etc. Luckily, there’re customized solutions for a variety of uses. Such as, the weatherized camera and housings are good for an outdoor environment.

Stabilizing Unbalanced Cables & Power

You might also use baluns as a converter for unbalanced cables in your system. However, they might not be long enough sometimes. Hence, optic-fiber cables will come in handy.

While this is managed somehow, you’ll need an AC power adapter outlet. However, some specific PTZ models support Power over Ethernet cables. In this case, the controller and the power outlet will have a shared connection.

Fixing the Angle of View                           

The angle of view is related to the type of camera lens. Generally, it’ll cover a wide range with multiple angles of view. Most of the PTZ’s come with a fixed lens that doesn’t allow changing.

However, ensure the right camera placement to cover a large space in the frame when fully zoomed out. Also, the zoom-in should give you nice surveillance of the surroundings. Don’t push the limit of the device. Just keep it nice and clean based on its capability.

You might choose to have high-end cameras for a few extra bucks. If that’s really essential, don’t be stingy about that because security comes first!

Why You Need a PTZ Camera

If you’re looking for the best surveillance camera at a lower cost, PTZ might be a no-brainer choice! However, this could be a real headache for non-techy persons to install them properly. One of the reasons is that they don’t allow accommodating third-party components.

That makes the overall system very self-contained.

Besides, you’ll often face some other critical issues like video storage space or bandwidth reduction, etc. If you’re careful with all those technical jargon and can handle it properly, this is for you! But, alternatively, a motorized PT head might be a great option.

You can accommodate it with your regular video camera. This will be like a customized and highly flexible video production environment. However, this might require calling an electrician to run the settings for you but works great for a true broadcast performance.

Conclusion

We hope that sheds some light on how to setup ptz cameras properly. It might be a little bit technical with the wiring and configuration.

Yet, it’s still quite simple to do if you know what you’re after.

If you’ve gone through our extensive guide, you should get a clear view of what it is, how it works, so on and so forth! Just ensure you’ve all the essential mounting kits, ptz controller, cable extensions, and then you’re good to go!

So that’s it and if you find this tutorial helpful, make sure to share it with others.

Leave a Comment

Your email address will not be published. Required fields are marked *

DigiCamGuides.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon, the Amazon logo, AmazonSupply, and the AmazonSupply logo are trademarks of Amazon.com, Inc. or its affiliates.